Whirlpool is a well-known brand in the home appliance industry that offers a full line of premium products to meet the needs of all consumers. However, a simple incorrectly set oven clock can prevent the oven from starting. So if you've just bought a new Whirlpool oven or just need to set the time after a power outage, this guide will explain how to quickly and easily set the time on your Whirlpool oven.
How to set the time of a Whirlpool oven: main procedure
Several reasons may lead you to have to change the time of the Whirlpool oven: you have had a power cut or you have switched to summer time. You have just purchased your oven and it does not indicate the correct time. Or the hour is flashing and you can't start the oven.
Be aware that the procedure for setting the clock of a Whirlpool oven varies depending on the model that you own. So don't hesitate to consult the user manual corresponding to your oven. If you no longer have it available in paper format, you can find it on the manufacturer's website. Just go to the Whirlpool website, section " Services "Then" HOW TO USE ».
Be aware, however, thata common procedure to most models exists. So, in general, here the steps to follow to set the clock of your Whirlpool oven :
- Simultaneously press and hold the + and - buttons from the oven.
- The small dot in the center of the screen starts to flash.
- Set the time by pressing the + and – buttons and validating by pressing OK.
- Set the minutes by pressing the + and – buttons and validating with OK.
To confirm that the time has been set, the Whirlpool oven emits a beep.
Changing the time of a Whirpool oven: other solutions
If this procedure did not work or it does not match your Whirlpool oven model, then you can tryother standard manipulations to change the time:
1 method:
- Make sure that the two main buttons are set to " 0"
- Press the OK button for a few seconds.
- The clock starts flashing.
- Set the time with the + and - buttons then press OK.
- Set the minutes with the + and – buttons then press OK.
Your Whirlpool oven's clock should then be set as desired.
2 method:
- Press the OK button for several seconds of your Whirlpool oven.
- The oven should emit 3 beep and the clock will start flashing.
- Change the time with the + and – buttons then press ok
- Then change the minutes in the same way
Press OK to confirm. The time is now changed on the Whirlpool oven.
3 method:
- Turn the programming button located on the left on the gear symbol
- The display indicates "language". Turn the selection button to the right one notch so that the display indicates " time"
- Push the button OK.
- Adjust the hours by turning the left button, press OK, then set the minutes by doing the same.
- Validate by pressing the OK button.
The programmed time should be displayed on your Whirlpool oven.
What if you still can't set the Whirlpool oven clock?
If these methods don't work, try turn off the power to the oven for 1 minute at the level of the electrical panel, then, to restore the current and set the clock within one minute the power cut.
If nothing helps and you can't change the time, then you can try reset oven, or contact the Whirlpool customer service to get help from an advisor. You can contact consumer service on 09 69 39 12 34 (French number).
Before contacting them, remember to bring the reference of your oven which you will find on the identification plate of the latter. The identification plate is usually located on the side upright of the oven cavity (visible when opening the door):
Also remember to make sure beforehand that the time setting manipulation does not appear on the instructions for use.
