My Dyson stick vacuum cleaner smells bad, what should I do?

Different types of bad smells can appear on a Dyson upright vacuum. Can he smell dust, dirt, heat, or even scorching? Depending on the type of smell you encounter, this may be of varying concern. Know now that apart from the smell of burning, other smells are nothing to worry about and can be treated or avoided with preventive solutions. So without waiting, find out What to do when your Dyson upright vacuum smells bad?

Bad smelling Dyson stick vacuum: how to get rid of bad smells?

Concretely, a vacuum cleaner is used to clean your interior. It is on the front line of cleaning your home and therefore collects all the dirt that is on the floor of the home. So, what could be more normal for him to end up smelling bad? But this is not inevitable ! To avoid bad smells, preventive solutions exist. And if your Dyson vacuum already smells bad, there are some tips that work great to get rid of it. Discover now all the solutions and tips to get rid of bad odors from your Dyson vacuum.

Note: The operations in this article are carried out with the vacuum cleaner unplugged and turned off. 

Empty and clean the tank

Dyson stick vacuum cleaner that smells bad, what to do?

To begin with, and while it may seem obvious, it may be that your Dyson stick vacuum cleaner smells bad because of the dirt in the tank. This in particular if the maximum capacity of the tank is reached or practically reached (3/4). Therefore empty the vacuum cleaner tank if you have not already done so. Once emptied you can wash the tank to get rid of all the dirt residue stuck to the walls. You can wash it in clean water or, if it is really dirty, use a soft or microfiber cloth dampened with household alcohol. Be careful, you will have to wait for the tank to dry before closing it, plugging it in and / or using it.

Moreover, if your Dyson vacuum feels hot, the reservoir may also be responsible. In fact, you should know that the more the tank fills, the less air circulates correctly in the vacuum circuit. This then forces the engine to force and lets the hot odors appear.

You will understand, to avoid the problems of hot odors or other foul smells, think about empty regularly the tank, without waiting. The best is to do it after each use. In all cases, do not allow dirt and grime to stay in the tank for too long or to reach 3/4 of the tank.

Clean or replace the Dyson vacuum filter

La bad smell coming from your Dyson stick vacuum is likely to come from the filter. Indeed, the filter fulfills several functions. It is both essential for the vacuum cleaner to operate normally, but it is also used to retain and remove dust, dirt and bad odors.

Unfortunately, this filter becomes clogged over time, and no longer manages to perform its functions. It then no longer retains bad odors, and even more serious, the dust deposits that form over time reduce its filtration efficiency and end up reaching the engine. The accumulation of dust particles in the engine will then have the consequence of forcing it to force it to operate correctly. It will therefore tend to overheat and smell hot, even sometimes burnt.

For get rid of bad smells and hot smells on your Dyson vacuum, it will be necessary then that you wash or change the filter. It is located at the top of the cyclone block of your device. To remove it, you just have to pull on the small stick that protrudes. On some models, you will have to unclip it by turning it counterclockwise.

1 - Dirty filter: wash it

If you find that the filter is dirty, wash it according to Dyson's cleaning tips, i.e .:

  1. Wash the filter only by hand, under cold running water
  2. Squeeze it gently between your hands to wring it out
  3. Repeat the operation until the water flowing out of the filter is clear
  4. Dry the filter for at least 24 hours. Wait until it is completely dry because replacing a wet or damp filter can cause a short circuit or a failure on the vacuum cleaner.
  5. Put the filter back into the stick vacuum, making sure it fits properly.

You can find all the maintenance and cleaning advice for the filter corresponding to your model of stick vacuum cleaner in the documentation supplied with it. If you no longer have it, check out their online guide.

2 - Damaged filter: change it

If you find that the filter is damaged, torn, or too dirty, it will have to be replaced in its entirety. Once again we recommend that you order it on the Dyson website to be sure to have a certified part and therefore of quality.

Remember that prevention is the best medicine. To prevent your Dyson stick vacuum cleaner from smelling bad again and keeping its filter efficiency, you will need to clean it regularly.

Clean the suction tube of the stick vacuum cleaner

When your Dyson vacuum does not smell good, it is also possible that residues or dirt has clung to the walls of the tube. Their decomposition or the air rushing inside can then bring out a bad smell when you vacuum.

To adjust this, you just need to clean the tube vacuum cleaner. To do this, separate it from these two ends. Visually check that there are no obstructions in the tube that could interfere with its suction power. Then run the tube under the shower faucet with hot water and a strong spray. Once again, allow the tube to dry before reassembling it.

Remove dirt from the brush

Finally, when your Dyson stick vacuum cleaner smells bad, it may also come from the brush. Indeed, it is constantly in contact with the ground and it is on the front line to pick up anything that is lying on the ground. Food residues, animal hair and various dirt can, over time, release a bad smell.

You will then have to remove the dirt from the roller by pulling it out of the brush. You can find the operation to do this in the user manual of your model of Dyson vacuum cleaner or on the net. You will then need to clean the transparent brush shell with a dry cloth. Warning, do not use water to clean the inside of the transparent shell because there is a power supply connected to the motor in the bottom. The water could then cause a short circuit.

What if the Dyson upright vacuum smells burnt?

If you feel a burning or hot plastic smell coming from your Dyson upright vacuum, this may be the sign of a overheated. In this case, stop the device immediately. If you have used the device extensively, this may not be indicative of a problem. Then wait a few minutes and, if you have not already done so, clean the filter as seen previously.

Then try to restart your vacuum cleaner. Yes the smell of burning returns, you will then need to contact the Dyson after-sales service so that a technician can find a personalized solution for you. This is all the more valid if the vacuum cleaner no longer works, that he turned off automatically, or that he tripped the electrical panel. Indeed, this may indicate a and therefore affect the performance and lifespan of the device.

Tips to stop your Dyson vacuum from smelling bad

As seen previously, when your Dyson vacuum does not smell good, you must clean it thoroughly. Once the cleaning of its various components is completed, you can then deodorize or mask bad smells potentially remaining with a few tips.

Bad smell Dyson vacuum cleaner what to do?

Use vacuum cleaner granules

On sales websites, you can find for sale scented granules for vacuum cleaners. You just have to pour the granules on the ground, then suck them up, obviously having previously emptied the tank of your vacuum cleaner. The advantage of granules is that they also contain sanitizing and antibacterial properties.

Using baking soda

A product that many people have in the kitchen or bathroom drawers can also be used to deodorize your Dyson vacuum. It's about baking soda. In this case, it will not be a question of giving it a pleasant smell, but of cleaning and sanitizing it to get rid of all its bad smells. To use it, nothing could be simpler: each time you empty the tank of your vacuum cleaner, place about 2 tablespoons of baking soda on the ground and vacuum it up.

Using essential oils

Finally, for prevent your Dyson vacuum from smelling bad, you can also use the essential oils. This should suit you even more if you are a natural lover! Indeed, essential oils are 100% natural and pure products, used since the dawn of time for their multiple benefits.

To use them as a perfume for your vacuum cleaner, just drop a few drops of an essential oil of your choice on a small piece of absorbent paper or cardboard. Then put it directly into the tank so that its smell settles on the walls.

Do not hesitate to leave us a comment if you have any other tips to get rid of a bad smell on a Dyson stick vacuum!

Leave comments